Roku XD 2050X Remote Battery Terminal Replacement

Geschrieben von: William
  • Kommentare: 0
Roku XD 2050X Remote Battery Terminal Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

15 Minuten

Einleitung

Use this guide to replace a damaged or malfunctioning battery terminal in the Roku XD 2050X remote control. To complete this guide, you will need to disassemble your remote and use a soldering iron to replace the terminal.

  1. qKqDGsq5VTwQSFWT
    qKqDGsq5VTwQSFWT
    miMrreesJOOBUwog

    • Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

    • Remove the battery cover.

    • Remove the two AA batteries.

  2. Y3Xo2NTBEScTHYyy
    Y3Xo2NTBEScTHYyy
    S1jlwOJDioEETtAj

    • Insert flat edge of spudger into seam between the top and bottom halves of the remote control.

    • Gently twist the spudger to separate the top and bottom halves of the remote.

  3. AF3lHQMQTmH3dkMo

    • Gently use the spudger to pry the circuit board loose.

  4. WJV3TXcGtceplIHt

    • Using either end of the spudger, gently lift and remove the clear keypad backing.

  5. dTxPBC1IyZ6dfnQk

    • Using either end of the spudger, lift and remove the rubber keypad.

  6. BKYAvibpvMqMMQtI

    • Desolder the contacts for the battery terminals.

    • Remove the battery terminals from the circuit board.

    • For hep with soldering view the ifixit soldering guide.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

William

Mitglied seit: 30/01/15

1603 Reputation

0 Kommentare