SuperSonic Matrix Mid SC-999 Microphone Replacement

Geschrieben von: Harris Dagha
  • Kommentare: 0
SuperSonic Matrix Mid SC-999 Microphone Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

In this guide you will need to remove the back cover of the device and then locate the microphone. Using a soldering iron, you will remove the preexisting microphone and replace it.

Because this task requires the use of a soldering iron, prior experience with soldering/desoldering will be beneficial.

  1. maUWjIAdwvsjZ6By

    • Wedge the plastic opening tool between the back cover of the device and the front panel.

    • You will hear a snapping sound as the cover is separated from the body of the device.

  2. lhFeLCWfEiSxICV5

    • Slide the opening tool along the seam between the front panel and the back cover to un-clip the remaining connections around the device.

    • Again, you will hear a snapping sound as the cover is separated from the body of the device.

  3. QIUocuIlYthYw62V
    QIUocuIlYthYw62V
    ixu1Drea45QeXCHY

    • Lift the back cover from the body of the device to expose the internal components.

  4. 4KkYtYZ5sDuRxhTJ

    • Remove the microphone from its compartment.

    • The microphone is located toward the bottom left corner of the device (assuming the speakers are located on the right side of you).

  5. uuwpidNtg4KGphrP
    uuwpidNtg4KGphrP
    cQukMeZRBJaJ6ZnU

    • Use the soldering iron to remove the wires connected to the microphone.

    • If you're unfamiliar with soldering or desoldering, check out this guide.

    • Be sure to wear protective eye wear. Also, keep in mind that the soldering iron will become extremely hot.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Harris Dagha

Mitglied seit: 26/03/15

866 Reputation

0 Kommentare