Einleitung

When your device is having difficulties cooling down, or if the fan is far too loud then it’s time for a replacement. Keep in mind for this guide you will need to know how to apply Thermal Paste to your device.

  1. RacYrT4ldNtotZen
    • Turn off the laptop.

    • Flip the laptop over so the bottom is facing upwards and the hinges are closest to you.

    • Remove the fifteen 5 mm screws from the back panel using a Phillips #0 screwdriver.

  2. mmyLxxRmCQ4kccxM
    • Lift up back panel using your hands and remove it from the rest of the laptop.

  3. 1emejiB4NGAcmQih
    • Lift the plastic covering over the battery plug.

  4. WARAXXQ25wmF4JOR
    • Pull the wired cable up towards the top of the laptop to disconnect it from its socket on the motherboard.

  5. YQ6JmMEYEyUSUTbI
    • Remove the single 2 mm screw from the corner of the laptop using a Phillips #0 screwdriver.

  6. Pj21i1PEUNGbaLZP
    • Remove the three 3 mm screws from the battery using a Phillips #0 screwdriver.

  7. Y5hQ5ubZOX6ivlpW
    • Lift up on the battery with your hands and remove it from the laptop.

  8. RuLfWRCiGHocvyVU
    • Remove the four 3 mm screws from the heat sink using a Phillips #0 screwdriver.

  9. 3DqOeTiEFmraPJAy
    • Remove the two 4 mm screws from the fan using a Phillips #0 screwdriver.

  10. ugPrfGFcIhgGJdwL
    • Remove the heat sink from the laptop.

  11. adyJGNpn1QuDSNPf
    • Pull towards the bottom of the laptop to disconnect the fan cable from its connector on the motherboard.

  12. VGvCwmnlYtv3JOp5
    • Lift up on the fan and remove it from the laptop.

    • When replacing the fan and heat sink, be sure to reapply thermal paste.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Luis Juen Baez

Mitglied seit: 25/10/21

585 Reputation

0 Kommentare