Trio Stealth-10 Speaker Replacement

Geschrieben von: Daniel Coleman
  • Kommentare: 0
Trio Stealth-10 Speaker Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

Keine Schätzung

Einleitung

If the speaker on your Trio Stealth-10 is no longer functioning, replacement isn't difficult and this guide will give you the step by step procedure to do so.

  1. eCJR1dIQ4GKUFJQq

    • To remove the back panel, you will need to use a plastic opening tool and slowly separate the back panel from the device.

  2. NAH5mlWhF5eZpTfe

    • This next step will require you to solder a couple of wires off the motherboard. We recommend you get someone to help you if you are unfamiliar with soldering or use Ifixit's Soldering guide to help you.

    • Next you must solder off the wires that connect the speaker to the motherboard.

  3. vQMM11TiXtwHdCXi

    • Next you will need to remove the two screws attached to the speaker. If you have a 54 bit Driver Kit use the Philips Head 0 (or PH 0) head to remove the two 4mm screws.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Daniel Coleman

Mitglied seit: 29/10/15

640 Reputation

0 Kommentare