Azpen A740 Speaker Replacement

Written By: Mallory
  • Comments: 0
Azpen A740 Speaker Replacement

Difficulty

Moderate

Steps

3

Time Required

10 minutes

Introduction

  1. QVV2P5blaOelZWvv

    • Use the plastic opening tool or black spudger tool to lift the back panel off the tablet.

  2. A1F1H4f2HOgEtQhp
    A1F1H4f2HOgEtQhp
    fReSQsUFEZmDrIyN

    • The speaker will be attached by 2 screws with 3.75mm and 3.81mm at the bottom of the plastic holding the speaker in. These 2 screws will need to be removed in order to replace the speaker with a pentalobe screwdriver.

  3. kGsqO6wDICkTWeCG
    kGsqO6wDICkTWeCG
    OQMqVlgWSFsIAqrJ

    • Once the screws are removed, you should fully desolder the speaker wires that are attached to the motherboard. Instructions on how to desolder these wires are here on ifixit: How To Solder and Desolder Connections

    • After switching out the old speaker, just follow the directions in reverse to finish.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Mallory

Member since: 21/01/15

346 Reputation

0 comments