Ematic Model FTABMP2 Battery Replacement

Written By: Timothy
  • Comments: 0
Ematic Model FTABMP2 Battery Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

A guide on how to solder --> How To Solder and Desolder Connections

  1. gJnX6KOktWaokMG3
    gJnX6KOktWaokMG3
    JTnOwSJ6gXF2qDYB

    • Use a spudger to pry open the case of your device to reveal the inside.

  2. q6XqRpLmLFh3k6nO
    q6XqRpLmLFh3k6nO
    KuDKtCZ1qoQRNgMq

    • Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.

  3. RoHcfO14nNP3DCFN
    RoHcfO14nNP3DCFN
    bThbwnVuZvBKLRlf

    • Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device.

  4. GZSvppdDQeVybuDC

    • Unsolder the gray, black, and red wires from the motherboard to release the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Timothy

Member since: 21/01/15

505 Reputation

0 comments