Introduction
In this guide we are going to replace the charging report on the Huawei ascend Y300 android smartphone. Before starting, it is a good idea to prepare an organized area to carry out the repair. It is also helpful to have a way of containing loose screws so they do not become lost. In addition, his guide requires soldering, a “How To” guide is included.
-
-
Remove the back plate by hand. There is a small indent on the bottom of the phone to pry open.
-
-
-
Using the plastic opening tool, pry the screen from the casing. Insert the tool between the case and screen to pry the pieces apart.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
