Diol

A geminal diol has two hydroxyl groups bonded to the same atom. These species arise by hydration of the carbonyl compounds. The hydration is usually unfavorable, but a notable exception is formaldehyde which, in water, exists in equilibrium with methanediol H₂C(OH)₂.[4] Another example is (F₃C)₂C(OH)₂, the hydrated form of hexafluoroacetone. Many gem-diols undergo further condensation to give dimeric and oligomeric derivatives. This reaction applies to glyoxal and related aldehydes.

In a vicinal diol, the two hydroxyl groups occupy vicinal positions, that is, they are attached to adjacent atoms. These compounds are called glycols[5] (though the term can be used more widely). Examples include ethane-1,2-diol or ethylene glycol HO−(CH₂)₂−OH, a common ingredient of antifreeze products. Another example is propane-1,2-diol, or alpha propylene glycol, HO−CH₂−CH(OH)−CH₃, used in the food and medicine industry, as well as a relatively non-poisonous antifreeze product.

On commercial scales, the main route to vicinal diols is the hydrolysis of epoxides. The epoxides are prepared by epoxidation of the alkene. An example in the synthesis of trans-cyclohexanediol[6] or by microreactor:[7]

For academic research and pharmaceutical areas, vicinal diols are often produced from the oxidation of alkenes, usually with dilute acidic potassium permanganate or Osmium tetroxide.[8] Osmium tetroxide can similarly be used to oxidize alkenes to vicinal diols. The chemical reaction called Sharpless asymmetric dihydroxylation can be used to produce chiral diols from alkenes using an osmate reagent and a chiral catalyst. Another method is the Woodward cis-hydroxylation (cis diol) and the related Prévost reaction (anti diol), which both use iodine and the silver salt of a carboxylic acid.

Other routes to vic-diols are the hydrogenation of acyloins[9] and the pinacol coupling reaction.

1,3-Diols are often prepared industrially by aldol condensation of ketones with formaldehyde. You can use many different starting materials to produce syn- or anti-1,3-diols.[10] The resulting carbonyl is reduced using the Cannizzaro reaction or by catalytic hydrogenation:

RC(O)CH₃ + CH₂O → RC(O)CH₂CH₂OH

RC(O)CH₂CH₂OH + H₂ → RCH(OH)CH₂CH₂OH

2,2-Disubstituted propane-1,3-diols are prepared in this way. Examples include 2-methyl-2-propyl-1,3-propanediol and neopentyl glycol.

1,3-Diols can be prepared by hydration of α,β-unsaturated ketones and aldehydes. The resulting keto-alcohol is hydrogenated. Another route involves the hydroformylation of epoxides followed by hydrogenation of the aldehyde. This method has been used for 1,3-propanediol from ethylene oxide.

More specialized routes to 1,3-diols involves the reaction between an alkene and formaldehyde, the Prins reaction. 1,3-diols can be produced diastereoselectively from the corresponding β-hydroxy ketones using the Evans–Saksena, Narasaka–Prasad or Evans–Tishchenko reduction protocols.

1,3-Diols are described as syn or anti depending on the relative stereochemistries of the carbon atoms bearing the hydroxyl functional groups. Zincophorin is a natural product that contains both syn and anti 1,3-diols.

Diols where the hydroxyl groups are separated by several carbon centers are generally prepared by hydrogenation of diesters of the corresponding dicarboxylic acids:

(CH₂)_n(CO₂R)₂ + 4 H₂ → (CH₂)_n(CH₂OH)₂ + 2 H₂O + 2 ROH

1,4-butanediol, 1,5-pentanediol, 1,6-hexanediol, 1,10-decanediol are important precursors to polyurethanes.[11]

Diols react as alcohols, by esterification and ether formation.[12]

Diols such as ethylene glycol are used as co-monomers in polymerization reactions forming polymers including some polyesters and polyurethanes.[12] A different monomer with two identical functional groups, such as a dioyl dichloride or dioic acid is required to continue the process of polymerization through repeated esterification processes.

A diol can be converted to cyclic ether by using an acid catalyst, this is diol cyclization. Firstly, it involves protonation of the hydroxyl group. Then, followed by intramolecular nucleophilic substitution, the second hydroxyl group attacks the electron deficient carbon. Provided that there are enough carbon atoms that the angle strain is not too much, a cyclic ether can be formed.

1,2-diols and 1,3-diols can be protected using a protecting group.[13] Protecting groups are used so that the functional group does not react to future reactions. Benzylidene groups are used to protect 1,3-diols.[13] There are extremely useful in biochemistry as shown below of a carbohydrate derivative being protected.

Diols can also be used to protect carbonyl groups.[14] They are commonly used and are quite efficient at synthesizing cyclic acetals. These protect the carbonyl groups from reacting from any further synthesis until it is necessary to remove them. The reaction below depicts a diol being used to protect a carbonyl using zirconium tetrachloride.[15]

Diols can also be converted to lactones employing the Fétizon oxidation reaction.

In glycol cleavage, the C−C bond in a vicinal diol is cleaved with formation of ketone or aldehyde functional groups. See Diol oxidation.

In general, organic geminal diols readily dehydrate to form a carbonyl group.