Heterogeneous combustion

Heterogeneous combustion, otherwise known as combustion in porous media, is a type of combustion in which a solid and gas phase interact to promote the complete transfer of reactants to their lower energy potential products. In this type of combustion a high surface area solid is immersed into a gaseous reacting flow, additional fluid phases may or may not be present. Chemical reactions and heat transfer occur locally on each phase and between both phases. Heterogeneous Combustion differs from catalysis as there is no focus to either phase individually but rather both examined simultaneously. In some materials, such as silicon carbide (SiC), oxide layers, SiO and SiO2, which form on the surface enable the adsorption of water vapor from the gas phase onto the solid lowering partial pressures.[1] In this regime of combustion, thermal heat released from the combustion byproducts are transferred into the solid phase by convection; conduction and radiation both then conduct heat upstream (along with adverse convection within the gas phase). Heat is then convectively transferred to the unburnt reactants.[2]

Applications

Within the literature, there many applications of heterogeneous combustion which are derived from the unique manner in which this combustion process recirculates heat. These devices may be utilized as either stand alone devices, or in conjunction with other means of energy conversion for highly efficient combined heat and power (CHP) applications. For example, electricity production via both radiative and convective heat exchange with the combustion chamber can be accomplished using Organic Rankine Cycles in a multi step heating process,[1] or using strictly radiative emissions via photovoltaic and thermionic generators.[1] Heterogeneous combustors may be utilized for small-scale heating purposes,[3] and as oxidizers of volatile organic compounds (VOCs).[4] Heterogeneous combustion may also be combined in series and parallel with multiple injection stages for use in gas flares at chemical manufacturing plants or oil wells.[1]

Flame structure

Within a combustion chamber containing porous media, structure of the environment can be assumed as follows. A preheating region exists prior to the surface of the flame front denoted by δp. Preheating length is marked by the beginning of the porous solid where appreciable heat transfer to the gas phase occurs and ends when the solid and gas phase reach equilibrium temperature. The region of chemical heat release, the flame, whose thickness can be given as δL, exists following the preheat region and its length is dependent upon mass flux, surface properties, and equivalence ratio. Beyond the flame, where minimal chemical heat release occurs, heat is convectively transferred from the post combustion gases into the solid. Heat then conducts and radiates through the solid structure upstream through the flame. Within the preheating region, heat is again convectively transferred from the solid structure to the gas.[5]

The flame structure inside the porous matrix has been imaged by using X-ray absorption.[6] To evaluate the temperature within the gas phase, the reacting mixture was diluted with Krypton: an inert gas that has a large X-ray absorption coefficient.[7]

References
  1. Terracciano, Anthony (2016). "Design and development of a porous heterogeneous combustor for efficient heat production by combustion of liquid and gaseous fuels". Applied Energy. 179 (1): 228–236. doi:10.1016/S0082-0784(81)80052-5.
  2. Takeno, Tadao (1981). "A theoretical study on an excess enthalpy flame". Symposium (International) on Combustion. 18 (1): 465–72. doi:10.1016/j.apenergy.2016.06.128.
  3. Babkin, V (2010). "Seepage gas combustion". Applied Energy. 87 (7): 2148–2155. doi:10.1016/j.apenergy.2009.11.010.
  4. Avdic, F (1987). "Seepage gas combustion". Combustion, Explosion, and Shock Waves. 23 (5): 531–547. doi:10.1007/BF00756535. S2CID 95758151.
  5. Terracciano, Anthony Carmine (2014). DESIGN AND DEVELOPMENT OF HETEROGENEOUS COMBUSTION SYSTEMS FOR LEAN BURN APPLICATIONS (PDF) (M.S.M.E). University of Central Florida.
  6. Dunnmon, Jared; Sobhani, Sadaf; Wu, Meng; Fahrig, Rebecca; Ihme, Matthias (2017). "An investigation of internal flame structure in porous media combustion via X-ray Computed Tomography". Proceedings of the Combustion Institute. 36 (3): 4399–4408. doi:10.1016/j.proci.2016.06.188.
  7. Boigné, Emeric; Muhunthan, Priyanka; Mohaddes, Danyal; Wang, Qing; Sobhani, Sadaf; Hinshaw, Waldo; Ihme, Matthias (2019). "X-ray computed tomography for flame-structure analysis of laminar premixed flames". Combustion and Flame. 200: 142–154. doi:10.1016/j.combustflame.2018.11.015. PMC 6278941. PMID 30532316.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.