Protective colloid

A protective colloid is a lyophilic colloid that when present in small quantities keeps lyophobic colloids from precipitating under the coagulating action of electrolytes.

Need for protective colloids

When a small amount of hydrophilic colloid is added to hydrophobic colloids it may coagulate the latter. This is due to neutralisation of the charge on the hydrophobic colloidal particles. However, the addition of large amount of hydrophilic colloid increases the stability of the hydrophobic colloidal system. This is due to adsorption.

When lyophilic sols are added to lyophobic sols, depending on their sizes, either lyophobic sol is adsorbed in the surface of lyophilic sol or lyophilic sol is adsorbed on the surface of lyophobic sol. The layer of the protective colloid prevents direct collision between the hydrophobic colloidal particles and thus prevents coagulation.[1]

Examples

Lyophilic sols like starch and gelatin act as protective colloids.[2]

Measurement of protective action
Further information: Gold number

For a comparative study Zsigmondy introduced a scale of protective action for different protective colloids in terms of gold number. The gold number is the weight in milligrams of a protective colloid which checks the coagulation of 10ml of a given gold sol on adding 1 ml of 10% sodium chloride.

Thus smaller the gold number, greater is the protective action.[3] Gold numbers of some materials Gelatin 0.005-0.01 Albumin 0.1 Acacia 0.1-0.2 Sodium oleate 1-5 Tragacanth 2 [4]

References
  1. Hadkar (2007). Physical pharmacy. p. 96. ISBN 978-8185790343.
  2. Davis, P. (1957-01-01). "Protective colloid action of gelatin". Transactions of the Faraday Society. 53: 1390–1394. doi:10.1039/TF9575301390. ISSN 0014-7672.
  3. Murthy, Parameshwara (2008). University Chemistry, Volume 2. New Age International. p. 546. ISBN 978-8122409550.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.